• EN

DORMA TMS Ankastre Sistem Bileşenleri

TMS acil çıkış kontrol sistemleri için ankastre sistem bileşenleri

DORMA'nın ankastre sistem bileşenleriyle ankastre TMS sistemlerinin fonksiyonel erimini yükseltebilir ve genişletebilirsiniz. Tüm bileşenler ankastre TL-S TMS Comfort kontrol ünitesine veya RZ TMS 2 kaçış güzergahı kontrol kutularına bağlantı için hazır durumdadır. Ayrıca farklı anahtar serilerine ait kapak çerçeveleriyle birlikte kullanıma da uygundur.

TL-NC DCW®

Emergency pushbutton to open TMS escape route systems, ready for connection to RZ TMS 2 or the TL-S TMS 2 control board via DCW® system bus. Including visual and acoustic alarm and anti-tamper protection. The emergency pushbutton is covered by shatterproof safety glass.

TL-ST

Key switch for flush-mounted TL-UP Design door terminals or flush-mounted TMS Comfort systems, ready to lock and unlock doors with application in emergency exit control systems and door management systems.

Flush-mounted DCW® input/output module

Bus interface module with two or three freely programmable inputs and outputs for connection of devices with analogue switching contacts to the DORMA DCW® system bus. Ready for installation in device boxes.

TSD S55 DCW®

The LCD touch screen display allows the control of TMS systems and the visualisation of the system status. Via the keys, which are re-arranged randomly, authorised users can lock and unlock the door. In conjunction with the ZM 208 DCW® timer module, the TSD is ready for use as down counter. The system is connected via the DCW® system bus.

Flush-mounted siren S55

Multifunctional siren for installation in device boxes, 28 programmable sounds, international emergency signal for evacuation and adjustable volume to up to 107 dB/A.

Flush-mounted DCW® card reader

Flush-mounted card reader with keypad for installation in various switch ranges. The system is connected to the TMS via the DCW® system bus.

teaser_image